Tyres are essential components of your car to get it on the road. Car owners must take care of their tyres to make sure that they will drive their vehicle safely on the road without the risk of driving on a flat tyre.
Thus, when you have a flat tyre, you must inflate it immediately. It is likely that you will need to repair your tyre before you can inflate it again. Doing the inflation you can be done when you follow the instructions below.
Check Damages in the tyre
If your tyre slowly leaks air, you can just easily inflate it. However, if you can find damages in your tyre that has caused to be totally flat, you must repair it first before you can inflate it to prevent it from becoming flat again quite quickly. If you don't need any repair, you can continue with the inflation steps.
Get Your Jack and Use it to Raise Your Car
First, you must remove your wheel lug nuts before you raise your car. Then, the wheel must be removed. You can get the best tyre service via https://www.tyreandwheel.com.au/tyres.
Repair tyre Damage if Any
Possibly, you can plug a tiny hole using a repair kit. However, for a permanent fix, you can take away the tyre from your rim and patch it from its inside. Auto repair centers or service stations can do this job for you.
Connect Air Pump to a Valve System
Remove the valve system and put the hose over your stem. There are tyres that get inflated with nitrogen. However, this does not mean that your tyres cannot use air. Experts say that it is always possible to put more compressed air to tyres inflated with nitrogen.
The use of ordinary air will just dilute the nitrogen's purity in the tyre. It is advisable to get nitrogen refilled in your regular service center. Generally, a car tyre inflates by a pound every square inch for every 1.5 second your air nozzle is connected.
Check Air Pressure
The air pressure of your tyre must be checked and adjusted when needed. Make sure that the air pressure is the ideal psi based on what is detailed on the driver's side-door placard or owner's manual.
If not, you must add more air and check until you reach the appropriate level. Push the needle at the valve system's center when you need to release some air. Every 3 seconds, your tyre will release one psi approximately.